Build A New Computer
Build A New Computer
I like to make a computer from the part of the pieces. start from the motherboard, processor, RAMs, hard disk, power supply, graphic card, and casing.
First, I will take a motherboard and a processor. I install the processor to the motherboard and don't forget to add heat paste on the processor.
The heat paste is used for sync heat to aluminum heat sync and the fan will cooling them with the air.
After installing the processor, don't forget to install the fan above the processor. it is important. if you forget this, your processor might be broken.
Next is to install RAMs. we can choose to use a single channel or dual channel RAMs. the number of RAM slots is depended on the type of motherboard.
Usually, the number of RAM slots is two slots.
Install the RAM do you have to the motherboard. be careful, the type of RAM slots and RAM unit are the same.
Don't forget to lock the RAM in the slots so that it will save the computer operational if we turn on the computer unit.
Next is installing a hard disk to the motherboard unit. Usually, the hard disk that we used is one unit for one computer. use a cable we called that "SATA cable".
You have to know your motherboard supports the SATA slots.
The last but not last is installing power supply and installing all electricity to all component needed it.
The motherboard usually uses 2 kinds of power cable. the hard disk and DVD drive use SATA power cable, and the fan uses molex power.
Oh I forgot to install all casing cable. be careful to install USB and power/reset buttons.
and the last is installing a graphic card. if you have a graphic card. you can install it at the end of all component have installed.
Next is install all peripheral like a mouse, keyboard, monitor, speaker, and power cable.
eventually, your computer has done and ready to turn on.
is it not end?
Yeah, you need to install the operating system first.
I like to make a computer from the part of the pieces. start from the motherboard, processor, RAMs, hard disk, power supply, graphic card, and casing.
First, I will take a motherboard and a processor. I install the processor to the motherboard and don't forget to add heat paste on the processor.
The heat paste is used for sync heat to aluminum heat sync and the fan will cooling them with the air.
After installing the processor, don't forget to install the fan above the processor. it is important. if you forget this, your processor might be broken.
Next is to install RAMs. we can choose to use a single channel or dual channel RAMs. the number of RAM slots is depended on the type of motherboard.
Usually, the number of RAM slots is two slots.
Install the RAM do you have to the motherboard. be careful, the type of RAM slots and RAM unit are the same.
Don't forget to lock the RAM in the slots so that it will save the computer operational if we turn on the computer unit.
Next is installing a hard disk to the motherboard unit. Usually, the hard disk that we used is one unit for one computer. use a cable we called that "SATA cable".
You have to know your motherboard supports the SATA slots.
The last but not last is installing power supply and installing all electricity to all component needed it.
The motherboard usually uses 2 kinds of power cable. the hard disk and DVD drive use SATA power cable, and the fan uses molex power.
Oh I forgot to install all casing cable. be careful to install USB and power/reset buttons.
and the last is installing a graphic card. if you have a graphic card. you can install it at the end of all component have installed.
Next is install all peripheral like a mouse, keyboard, monitor, speaker, and power cable.
eventually, your computer has done and ready to turn on.
is it not end?
Yeah, you need to install the operating system first.
Komentar
Posting Komentar